The idea came from the yard
Richard Dutton, the company’s director, knew his market. His Middlewich branch had trades collecting small volumes of concrete, and there was a local market for 1 to 4m3 pours for jobs that needed more than a trailer load.
So he brought the idea to us through fibo Collect UK, our partner in the UK: could the collection plant load their four meter mini mix truck too?
It’s the kind of question we like. Many of our best developments haven’t started on a drawing board in Denmark. They’ve started with operators who know exactly what their customers need, and a partner network close enough to hear it.
To bring this concept to life, we needed to make a few modifications to the standard fibo Collect F1200. But that’s what we do best – create bespoke solutions tailored to our customers’ needs.
How one concrete batching plant for mini mix and collection works
Loading the mini mix truck called for two additions.
The first is height. We added a bypass button to the control panel, to allow operators to raise the conveyor belt to 3.6 m, high enough to discharge straight into the truck’s drum.
The second is how water enters the mix. Rather than sending fully wet concrete up the conveyor, truck loads run in stages:
- Aggregates and cement are weighed and dosed into the pan mixer as normal.
- Only a controlled proportion of the recipe water is added in the pan, followed by a short initial mix.
- The semi-dry material travels up the conveyor and into the truck.
- A second water outlet at the discharge end adds the remaining water directly into the drum, through an extra water pump running along the conveyor, which is drawing from the clean mains tank.
- The truck’s drum completes the mix, bringing the concrete to the required consistency and slump on the way to site.
An extra set of flow meters was added to the machine, to ensure that the water going into the mixing truck is measured down to the millilitre, which are working together with the moisture probes that are already measuring how much water is in the sand.
Splitting the water only works if the total is exact. Our R&D team in Denmark developed the staged process together with Oscrete’s local laboratory team, finding the right balance between the water added in the pan and the water added at the truck.
On site, moisture probes monitor the water content of the sand working with an additional flow meter to measure the water entering at the discharge point down to the millilitre. The control system uses both readings to set the final water dose, so each load is batched to meet the strength the recipe requires.
Collection customers come first
Loading the truck can’t be allowed to hold up the yard. Because the material spends less time in the pan, cycle times stay short. Depending on mixer configuration and recipe, individual batches of approximately 0.8 m³ to 1.2 m³ take around two to three minutes each, so the truck can typically be loaded in 10 to 12 minutes.
Dutton’s will schedule truck loading into quieter periods. Collection customers won’t be waiting around on the yard, and the plant earns from time that would otherwise sit idle.
What it means for builders merchants and operators
For builders merchants and sand and gravel operators already running mini mix, or thinking about it, Middlewich shows that the collection plant can double as the concrete batching plant for mini mix deliveries. One footprint, one set of raw-material storage and one control system, serving both.
It also shows how we like to work. A customer brings an idea, our partner network brings it to Denmark, and our engineers build it into the machine. If there’s a market you think fibo Collect could serve, talk to us.