Detail photos

Trailer

The batching plant is assembled on a common twin-axle, 13.6 M step frame semi trailer, where the hoppers are installed with standard container locks.

Counterflow mixer

Counterflow mixer with bottom and enclosure wearing plates in Hardox steel. Equipped with gear motor for optimised effect, hydraulic opening, inlet for cement auger and inspection hatches.

Hoppers

Two integrated twin hoppers for 2 x 2 types of aggregate. Each hopper holds respectively 2 x 6 M³ and 2 x 12 M³. Made in Hardox 450 steel with reinforced corners. 2 x 2 separate feed belts for dosing of aggregates.

Mixing arms and side scrapers

The mixer is equipped with two robust mixing arms, turn able mixing shovels and side scraper. 

Load cells

The counterflow mixer is placed on three 5000 kg electronic load cells with an accuracy of +/- 1%.

Web based control system with printer

Possibility of manual, semi-automatic and automatic operation and PC and web interface. No previous knowledge required and can be delivered with the language version desired. Stores up till 100 recipes. Dosing accuracy: +/- 1-2 %.

Discharge

Possibility of manual, semi-automatic and automatic discharge. Complete with overload protection and position sensor.

Pre-weighing of cement

Pre-weighing of cement assembled in a complete frame construction. Equipped with three load cells, inlet for cement auger, vibrator and pneumatically operated discharge gate.

Water pump

Parallel dosing of water and aggregates for reduced cycle time and pan mixer wear and reduced energy consumption.

Pre-weighing of water

Pre-weighing of water assembled in a complete frame construction. Equipped with three load cells and pneumatically operated discharge gate.

Additive pump

The additive pump is designed for the addition of liquid additives. Chemical addition happens by pumping the additives into the chemistry pre-weighing unit.

Pre-weighing of additives

Pre-weighing of additives assembled in a complete frame construction. Possibility of three types of additives. Equipped with three load cells and pneumatically operated discharge gate. Individual flush of the additive containers.

Equipment

The standard VIKING is delivered with air compressor and high-pressure cleaner.

Return on investment

Our machines and equipment have a very short pay back period. Let us calculate your return on investment – For free.

Open chat